WS2950C-PRO TESA Prof 7 Inch Colour WIFI Weather Station
NZ $350.61Incl GST
In stock ex Auckland, next business day delivery.
WS2950C-PRO
WIFI Weather Stations
Description
WS2950C-PRO TESA prof 7-inch colour WIFI weather station with super capacitance multi-sensor.
A professional-grade weather station with a 7-inch colour LCD that will measure almost anything the planet can throw at it. It can display temperature, wind speed, wind direction, wind chill, barometric pressure, and dew point.
These readings are sent from the outdoor solar transmitting sensor and indoor sensor built into the display. You can see how much rain has fallen in 1 hour, a day, a week, or a month, see the current UV index reading, and even see the current lux measurement outdoors, which is excellent for those with rooftop solar arrays. Install the sensors outside, and the readings will be transmitted wirelessly to the base unit up to 100m away.
TESA's newest professional WIFI weather station allows you to monitor your home and backyard weather conditions with the brilliant, easy-to-read LCD colour display. The enhanced Wi-Fi connectable option enables your station to transmit its data wirelessly to the world's largest personal weather station network, Weather Underground and view data on your mobile device.
Wireless Wind and Wind direction with a 1-degree resolution, accuracy: +/-12degrees
Wind speed in ms, km/h, mph, knots and bft (accuracy: <10m/s: +/-1m/s, >=10m/s: 10%)
Wireless Rainfall
Rainfall in inch, mm (accuracy: +/-10%)
Display rainfall in rate, event, day, week, month and total.
Alerts for indoor and outdoor temperature & humidity
Alerts for rain rate and rain day.
Alerts for wind speed.
Weather forecast: Sunny, Partly Sunny, Cloudy, Rainy, Stormy and Snowy
Pressure display with hPa, mmHg or inhg unit.
The heat index, wind chill and dew point for outdoor
High/Low records for indoor/outdoor temperature/humidity
MAX/MIN data records.
High/Mid/Off backlight controlled.
User accuracy calibration is supported.
Automatically save user-set parameters (unit, calibration data, alarm data...) into EEPROM.
When the DC power adapter is connected, the backlight is on permanently. When only battery-operated, the backlight is turned on only when the button is pressed and auto time out is 15s.