battery CTEK smart chargers 6V 12V CTEK Consumer Chargers

CTEK 56-987 MXS 5.0T 12V-5AMP NG Charger with Temperature Compensation

NZ $225.62 Incl GST
or 6 weekly interest-free payments from NZ $37.60 or 6 weekly interest-free payments with an initial payment of NZ $37.60 and weekly payments of NZ $37.60 Laybuy What's this?

Receive your purchase now, spread the total cost over 6 weekly automatic payments. Interest free!

  • Simply select Laybuy as your payment method at checkout
  • Login or Register for Laybuy and complete your order in seconds
  • Complete your purchase using an existing debit or credit card
  • Pay over 6 weeks and receive your purchase now
TEMPORARILY SOLD OUT - BACKORDER NOW. Please note: there are only 2 of this item currently in stock. the selected product is not available.

56-987

6V 12V CTEK Consumer Chargers

Description

The MXS 5.0 uses a unique and patented technology which charges batteries in an optimal way. There are three different programs and functions which can be used to ensure that your battery lasts longer.

Charging and maintenance charging
The MXS 5.0 charges your battery using a unique 8-stage process which supplies the right voltage to the battery at the right point in time in the charging cycle. The charger also automatically switches to maintenance charging for batteries left charging for more than ten days.

Reconditioning program
The program rectifies acid stratification through charging the battery at a higher voltage. The acid and water are therefore mixed through a controlled process. It's recommended that you recondition your battery once a year to ensure performance is maintained.

Charging in the cold and AGM batteries
A higher charge voltage is required at low temperatures. The program, therefore, increases the charging voltage to 14.7 volts instead of 14.4. This program is also excellent for AGM batteries.

8-Stage Battery Charging:
  • Step 1: Desulphation - pulsing voltage removes sulphates from the lead plates of the battery restoring the battery capacity
  • Step 2: Soft Start - tests if the battery can accept a charge. Charging begins if the battery is OK
  • Step 3: Bulk - charging with maximum current until approximately 80 % battery capacity
  • Step 4: Battery ready to use - charging with declining current to maximize up to 100 % battery capacity
  • Step 5: Analyse - tests if the battery can hold a charge. Batteries that cannot hold charge may need to be replaced
  • Step 6: Recond - reconditioning function for deeply discharged batteries
  • Step 7: Fully charged battery - maintaining the battery voltage at maximum level by providing a constant voltage charge
  • Step 8: Maintenance charging - maintaining the battery at 95-100 % capacity. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged
CTEK MXS 5.0 8-Stage Battery Charger Features:
  • Fully automatic 8-step charger
  • Provides fully automatic charging and can be left attached for months
  • Spark-proof and reverse polarity protected to ensure safety and vehicle electronics are not harmed during charging
  • Charges, conditions and maintains all types of lead-acid batteries: wet, MF, AGM, GEL, Dry and Calcium
  • Energy-efficient charges that extend battery life, reducing unnecessary replacement and waste
  • Used by leading vehicle manufacturers including Audi, Bentley, BMW, Ferrari, Jaguar, Lamborghini, Mercedes Benz, Porsche, Rolls Royce, Yamaha
CTEK MXS 5.0 8-Stage Battery Charger Specifications:
  • Charging voltage: 14.4/14.7/15.8 V
  • Charging current max: 5A
  • Battery capacity: 1.2-110 Ah, up to 160 Ah for maintenance
  • Ripple: <4%
  • Ambient temperature: -20C to +50c, the output power is reduced automatically at high temperatures
  • Battery size: 1.2-110AH up to 160ah for maintenance
  • Insulation: IP65 (splash and dustproof)
  • Weight: 0.6kg
  • Dimensions (LxHxW): 168 x 65 x 38mm
Specifications
  • Volt 12V
  • Rated Voltage AC 220-240VAC, 50-60Hz
  • Charging voltage SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V
  • Min battery voltage 2.0V
  • Charging current 5A max
  • Current, mains 0.6A RMS (at full charging current)
  • Back current drain <1Ah/month
  • Ripple <4%
  • Ambient temperature -20°C to +50°C, the output power is reduced automatically at high temperatures
  • Charger type 8 step, fully automatic charging cycle
  • Battery types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity 1.2-110Ah up to 160Ah for maintenance
  • Dimensions 168 x 65 x 38mm (L x W x H)
  • Insulation class IP65
  • Weight 0.6kg
  • Temperature compensation Built-in charge voltage compensation according to ambient temperature



 

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like